In most cases, repiping becomes necessary when the condition of the existing piping starts to fail. If you’re on well water and have copper pipes, that’s usually where we see problems. The minerals in the water eat away at the copper over time, causing pinholes and leaks. If we’re seeing that kind of damage in one area, chances are the rest of the piping isn’t far behind.
Sometimes, we can just replace or repair a small section. But more often than not, we end up repiping everything we can reach without causing too much disruption. These pipes are in walls and floors, so it’s not a quick job. But we do it right and we do it clean.
For waste piping, older homes tend to have cast iron or galvanized pipe, which rusts and breaks down over time. We cut that out and install new PVC pipe and fittings. It’s durable, clean, and a lot more reliable.
For water lines, we use PEX-A. It’s a little more expensive, but it’s the best option. It’s resistant to chemicals and minerals, which makes it perfect for homes on well water. Once it’s in, you don’t have to worry about corrosion or pinholes coming back.
We don’t cut corners on materials. If you’re paying to have your plumbing fixed, you shouldn’t have to go through it all over again in five or ten years. That’s why we use the best piping, the best fittings, and the right tools for the job. It’s just how we operate.
Old pipes don’t just leak, they corrode from the inside. That can cause all sorts of issues. You might get rust flakes, copper particles, or other debris in your water. And as the inside of the pipe breaks down, it also starts to restrict water flow. That’s where pressure drops come from.
Repiping clears all that up. With clean, smooth pipes throughout the system, you get better pressure, cleaner water, and far fewer problems down the line.
